DOPRAVA ZADARMO NA VŠETKY OBJEDNÁVKY. OBJEDNAJTE SI TERAZ!

Gumovo-korkové dosky pre utesnenie 2x1000x1000mm - BESTSELLER!

Unit Price for 1 ks. 45,10 EUR / ks.

Unit Price for 2 ks. 31,43 EUR / ks. Unit Price for 3 ks. 26,59 EUR / ks. Unit Price for 4 ks. 24,04 EUR / ks. Unit Price for 5 ks. 22,58 EUR / ks. Unit Price for 6 ks. 21,56 EUR / ks. Unit Price for 8 ks. 20,34 EUR / ks. Unit Price for 10 ks. 19,55 EUR / ks. Unit Price for 15 ks. 18,43 EUR / ks. Unit Price for 30 ks. 17,86 EUR / ks.

(s DPH)

Based on 3 Reviews

Kód: PGK1521-2

Hmotnost: 1.4 kg

Dostupnosť: Na sklade

ks.

Príslušenstvo

Kontaktné lepidlo na korok Wakol D 3540 0,8kg

38,26 EUR
(s DPH)

Na sklade

Based on 678 Reviews

ks.
Kontaktné lepidlo na korok Wakol D 3540 2,5kg - BESTSELLER!

54,84 EUR
(s DPH)

Na sklade

Based on 736 Reviews

ks.
Kontaktné lepidlo na korok Wakol D 3540 5kg

79,45 EUR
(s DPH)

Na sklade

Based on 248 Reviews

ks.
Polomatný lak na korkové podlahy a korkové steny WS EasyFinish 1L (Wicanders W-700)

56,02 EUR
(s DPH)

Na sklade

Based on 90 Reviews

ks.
Tekutý korok pre podlahové tesnenie Bostik 3070 - 500 ml - BESTSELLER!

34,51 EUR
(s DPH)

Na sklade

Based on 563 Reviews

ks.
9 Pieces Paint Roller Set 18cm - complete kit for gluing natural cork tiles!

31,19 EUR
(s DPH)

Na sklade

Based on 162 Reviews

ks.
Súbor vzoriek «Základný» populárnych výrobkov - viac ako 30 kus.

51,72 EUR
(s DPH)

Dodacia lehota: 1 tyzden

Based on 193 Reviews

ks.
Súbor vzoriek «Celkový» populárnych výrobkov - viac ako 40 kus.

67,30 EUR
(s DPH)

Dodacia lehota: 1 tyzden

Based on 23 Reviews

ks.

Rubber cork gasket material sheets are manufactured on the basis of cork granules and various types of rubber compounds NBR, SBR, EPDM, EVA, Neoprene, ACM, silicone, epichlorohydrin or polyurethane. The material obtained is extremely flexible, durable and resistant to grease, oils, fuels, gases and many other chemicals.

Sheets of cork rubber are dedicated to all applications where low or medium pressure is applied. Depending on requirements, the compounds are modified to obtain a product with optimum technical parameters and strength for a particular application.

The material of rubber cork sheets is produced in a multistage process of combining natural cork aggregate with an appropriate blend. Using special moulds blocks are obtained, from which mats of different sizes and thickness from 1 to 10 mm are subsequently produced.

Depending on the purpose they may have the following parameters:

- density:450-1250 kg / m3
- hardness:30-90 Shore
- compression: 8-60 % (at 400 psi)
- tensile strength: 0,5-3,5 MPa
- operating temperature: -60 – 175 °C

We offer, in stock, cork-rubber sheets in the format: 1000x1000mm, in thicknesses from 1 to 5 mm, from the largest Portuguese manufacturer, Amorim Cork Composites. For many years they have been successfully used in the following areas:

Automotive
- engine gaskets

Machine industry
- vibration isolation and seals

Electronics and electrical engineering
- spacers, gaskets, vibration isolation

Gas Industry
- reinforcing seals

Building
- continuous footing vibration insulation
- protection of devices against vibration
- expansion joints and building spacers

Wood industry
- manufacture of plywood finishing

Footwear
- orthopaedic insoles